Zento Space-Saving Swing Gate Turnstile Slim Design Dual Direction Access Control With LED Indicator

Zento Space-Saving Slim Design Dual Direction Access Control with LED Indicator Swing Gate Turnstile

Swing Turnstile Gate Feature:

✅ 0.8s Fast Passage: High-torque motor, throughput ≥35 persons/min
✅ Military-Grade Durability: 304 stainless steel + 8mm tempered glass, impact resistance ≥1000J
✅ 99.9% Accurate Recognition: Face ID/QR Code/RFID Card/NFC multi-authentication
✅ 360° Safety Protection: Dual infrared anti-pinch + anti-tailgating alarm
✅ -30℃~70℃ Extreme Adaptability: IP65 waterproof, stable in deserts/coastal areas

General functions of swing turnstile gates:

(1) Fault self-check and alarm prompt function, convenient for user maintenance and use;

(2) The operating status of the device can be programmed through the built-in small keypad on the main control panel;

(3) Mechanical structure and induction dual anti-pinch function. When the swing arm encounters resistance during the reset process, it will automatically stop or the motor will stop working within the default time. Swing turnstile gate will reset again after the default delay (until reset), and the force is very small (≤2Kg);

(4) Sound and light alarm function: including illegal intrusion and tailgating alarm;

(5) Anti-collision function, when there is no connection When receiving the swing turnstile gate opening signal, the swing arm automatically locks;

(6) Swing arm (arm) synchronization function;

(7) Automatic reset function. After the swing turnstile gate is opened, if no one passes within the specified time, the system will automatically cancel the user's access permission. The standard is automatic reset 5 seconds after opening;

(8) The channel automatically opens after power failure and automatically closes after power on;

(9) Swing turnstile gate can be connected to a variety of card reading devices and receive relay switch signals to work;

(10) Swing turnstile gate can control the entry and exit of personnel in one direction or two directions;

(11) swing turnstile gate can directly realize remote control and management through the management computer

Swing turnstile Parameter:

Functional features of swing turnstile gate products:

(1) Swing turnstile has fault self-detection and alarm prompt functions, which is convenient for users to maintain and use;

(2) The operating status of the equipment can be programmed online through the built-in small keypad on the main control panel;

(3) Anti-collision function. When the swing arm encounters resistance during the reset process, the motor automatically stops working within the specified time, and the force is very small;

(4) Anti-collision function. When no gate opening signal is received, the swing arm automatically locks;

(5) The swing arm is synchronously adjustable (for double swing situations);

(6) Swing turnstile has an automatic reset function. After the gate is opened, if no traffic passes within the specified time, the system will automatically cancel the reset. The user's access authority for this time;

(7) Normally open when power is off to meet the requirements of fire management;

(8) Swing turnstile can be connected to a variety of card readers and receive relay switch signals to work;

(9) Two-way swing, single and two-way control of personnel entry and exit;

(10) Swing turnstile can be directly remotely controlled and managed through the management computer;

(11) Delayed automatic reset, the standard is automatic reset 5 seconds after opening;

Expandable functions:

(1) Sound and light alarm function, including illegal intrusion alarm, anti-pinch alarm, etc.;

(2) Counting function;

(3) Infrared reset function;

(4) Lengthened chassis, lengthened swing arm, etc.

Swing arm specifications: Standard swing arm 600MM (can be lengthened or shortened appropriately)

Swing arm transmission angle: 180 degrees

Swing direction: unidirectional or bidirectional

Chassis material: Standard 304 stainless steel or customized 316 stainless steel

Power supply voltage: AC220±10% V, 50HZ

Drive motor: DC brushless motor 140W/24V (or brushed motor)

Motor speed: 1600 rpm (standard)

Input interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width＞100ms, driving current＞10mA

Communication interface: RS485 standard communication distance: 1200 meters